Jay Moulding Corporation: Insert, Compression, and Custom Molding.


Custom MoldingEmergency Lighting Battle LanternsRelay LanternsPortable Hand Lanterns

Rechargeable
Battle Lantern

LED Retrofit Kit

Rechargeable
Retrofit Kit






Now Accepting
Government
Credit Cards Only!


Molding Machine

You Name It...
We Can Mold It!


Emergency
Lighting
Battle
Lanterns


Emergency Lighting Battle Lanterns



Symbol 100.2

FSC 6230 / MIL-DTL-16377/53C
The SYM 100.2 is a hand-held portable lantern with mounting bracket (PC 25). This lantern can be powered with one or two 6 volt lantern batteries. Battery not included. Lanterns are tough, water tight and shock resistant.

SYM100.2L available with white or red LED


Symbol 101.2
FSC 6230 / MIL-DTL-16377/53C
This relay lantern, SYM 101.2, functions as emergency lighting aboard ships. It is equipped with 10 ft. cable, relay, and push button test switch. The cable, when plugged in or direct wired to electrical system, activates the lantern in a power outage providing light for approximately 12 hrs.
The lantern uses one or two 6 volt batteries. Battery not included.

OPTIONS:
SYM 101.2 115 VAC SYM 101.2L 115 VAC
SYM 102.2 115 VDC SYM 102.2L 115 VDC
SYM 108 230 VDC SYM 108L 230 VDC


Symbol 100.3 and 101.3
FSC 6230
SYM 100.3 is a rechargeable version of SYM 100.2. It is a hand-held portable lantern with mounting bracket (PC 25), solid state charger/control unit and a rechargeable battery.

OPTIONS:
SYM 100.3 115 VAC SYM 100.3L 115 VAC

FSC 6230 MIL-DTL-16377/53C
SYM 101.3 is an emergency lantern with a solid state charger/control unit, rechargeable battery, and push button test switch. The lantern may be used anytime during the charge cycle. When plugged into AC power, when power is terminated, the lamp will light. When AC power is restored the lantern will start recharging cycle. Recharge time: 8 hours. Lamp burn time: 6.5-7.5 hours depending on age and condition of battery.

OPTIONS:
SYM 101.3 115 VAC SYM 101.3L 115 VAC
SYM 101.3 220 VAC SYM 101.2L 220 VAC

MIL-DTL-16377/53C
RECHARGEABLE RETROFIT
CONVERSION KIT M16377/53-008

Kit is used to field convert the non-rechargeable Symbol 101.2 or Symbol 100.2 to a rechargeable SYM 101.3 or SYM 100.3

MIL-DTL-16377/53C
LED Retrofit Kit M16377/53-010

The LED Retrofit Kit is designed to replace the incandescent lamp in the Battle Lantern with a light emitting diode (LED). The conversion to a LED will provide a 100,000 hours of service life.

Replacement part for various Symbol lanterns are stocked.

Military Part Numbers

National Stock Numbers






JAY MOULDING CORP
7 Bridge Ave, Cohoes, NY 12047-4799
Phone: 518-237-4200 Fax: 518-237-6576
info@jaymoulding.com


Jay Moulding Corporation: Contact UsJay Moulding Corporation: ServiceJay Moulding Corporation: About UsJay Moulding Corporation HomeInjection MoldingCompression MoldingCustom MoldingNational Stock NumbersMilitary Part NumbersEmergency Lighting Battle Lanterns

COPYRIGHT 2004, BY JAY MOULDNG CORP. ALL RIGHTS RESERVED.
REPRODUCTION IN WHOLE OR PART WITHOUT PERMISSION IS PROHIBITED.

Website Design & Hosting Albany NY
Groupiehead Website Design Albany NY
www.groupiehead.com